arm64: dts: qcom: msm8998: remove unit name for thermal trip points

The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.

arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu4-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu5-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu6-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu7-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
clust0-mhm-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
clust1-mhm-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
wlan-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
multimedia-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu4-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu5-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu6-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu7-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
clust0-mhm-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
clust1-mhm-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
wlan-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
multimedia-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/cd6f0c7298437d35642b35c9ede9064c247d6090.1585562459.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c07fee6fd7eb9059c81cd3133ae99e6b4b261aa8..c45870600909f3cd676740a409aa0f4015e69a0e 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -500,7 +500,7 @@ cpu0-thermal {
                        thermal-sensors = <&tsens0 1>;
 
                        trips {
-                               cpu0_alert0: trip-point@0 {
+                               cpu0_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -521,7 +521,7 @@ cpu1-thermal {
                        thermal-sensors = <&tsens0 2>;
 
                        trips {
-                               cpu1_alert0: trip-point@0 {
+                               cpu1_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -542,7 +542,7 @@ cpu2-thermal {
                        thermal-sensors = <&tsens0 3>;
 
                        trips {
-                               cpu2_alert0: trip-point@0 {
+                               cpu2_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -563,7 +563,7 @@ cpu3-thermal {
                        thermal-sensors = <&tsens0 4>;
 
                        trips {
-                               cpu3_alert0: trip-point@0 {
+                               cpu3_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -584,7 +584,7 @@ cpu4-thermal {
                        thermal-sensors = <&tsens0 7>;
 
                        trips {
-                               cpu4_alert0: trip-point@0 {
+                               cpu4_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -605,7 +605,7 @@ cpu5-thermal {
                        thermal-sensors = <&tsens0 8>;
 
                        trips {
-                               cpu5_alert0: trip-point@0 {
+                               cpu5_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -626,7 +626,7 @@ cpu6-thermal {
                        thermal-sensors = <&tsens0 9>;
 
                        trips {
-                               cpu6_alert0: trip-point@0 {
+                               cpu6_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -647,7 +647,7 @@ cpu7-thermal {
                        thermal-sensors = <&tsens0 10>;
 
                        trips {
-                               cpu7_alert0: trip-point@0 {
+                               cpu7_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -668,7 +668,7 @@ gpu-thermal-bottom {
                        thermal-sensors = <&tsens0 12>;
 
                        trips {
-                               gpu1_alert0: trip-point@0 {
+                               gpu1_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -683,7 +683,7 @@ gpu-thermal-top {
                        thermal-sensors = <&tsens0 13>;
 
                        trips {
-                               gpu2_alert0: trip-point@0 {
+                               gpu2_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -698,7 +698,7 @@ clust0-mhm-thermal {
                        thermal-sensors = <&tsens0 5>;
 
                        trips {
-                               cluster0_mhm_alert0: trip-point@0 {
+                               cluster0_mhm_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -713,7 +713,7 @@ clust1-mhm-thermal {
                        thermal-sensors = <&tsens0 6>;
 
                        trips {
-                               cluster1_mhm_alert0: trip-point@0 {
+                               cluster1_mhm_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -728,7 +728,7 @@ cluster1-l2-thermal {
                        thermal-sensors = <&tsens0 11>;
 
                        trips {
-                               cluster1_l2_alert0: trip-point@0 {
+                               cluster1_l2_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -743,7 +743,7 @@ modem-thermal {
                        thermal-sensors = <&tsens1 1>;
 
                        trips {
-                               modem_alert0: trip-point@0 {
+                               modem_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -758,7 +758,7 @@ mem-thermal {
                        thermal-sensors = <&tsens1 2>;
 
                        trips {
-                               mem_alert0: trip-point@0 {
+                               mem_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -773,7 +773,7 @@ wlan-thermal {
                        thermal-sensors = <&tsens1 3>;
 
                        trips {
-                               wlan_alert0: trip-point@0 {
+                               wlan_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -788,7 +788,7 @@ q6-dsp-thermal {
                        thermal-sensors = <&tsens1 4>;
 
                        trips {
-                               q6_dsp_alert0: trip-point@0 {
+                               q6_dsp_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -803,7 +803,7 @@ camera-thermal {
                        thermal-sensors = <&tsens1 5>;
 
                        trips {
-                               camera_alert0: trip-point@0 {
+                               camera_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -818,7 +818,7 @@ multimedia-thermal {
                        thermal-sensors = <&tsens1 6>;
 
                        trips {
-                               multimedia_alert0: trip-point@0 {
+                               multimedia_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";