ARM: dts: socfpga: update missing reset property peripherals

Add reset property for gpio, i2c, sdmmc, nand, qspi, spi, uart, and
watchdog on base socfpga and socfpga_arria10.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index dcb8fba3d70974292cf1a4eba621a4a363ac6e6d..f365003f0102b33801e5ddd22f76c5abbd00440f 100644 (file)
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -585,6 +585,7 @@ gpio0: gpio@ff708000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xff708000 0x1000>;
                        clocks = <&l4_mp_clk>;
+                       resets = <&rst GPIO0_RESET>;
                        status = "disabled";
 
                        porta: gpio-controller@0 {
@@ -605,6 +606,7 @@ gpio1: gpio@ff709000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xff709000 0x1000>;
                        clocks = <&l4_mp_clk>;
+                       resets = <&rst GPIO1_RESET>;
                        status = "disabled";
 
                        portb: gpio-controller@0 {
@@ -625,6 +627,7 @@ gpio2: gpio@ff70a000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xff70a000 0x1000>;
                        clocks = <&l4_mp_clk>;
+                       resets = <&rst GPIO2_RESET>;
                        status = "disabled";
 
                        portc: gpio-controller@0 {
@@ -735,6 +738,7 @@ mmc: dwmmc0@ff704000 {
                        #size-cells = <0>;
                        clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
                        clock-names = "biu", "ciu";
+                       resets = <&rst SDMMC_RESET>;
                        status = "disabled";
                };
 
@@ -748,6 +752,7 @@ nand0: nand@ff900000 {
                        interrupts = <0x0 0x90 0x4>;
                        clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
                        clock-names = "nand", "nand_x", "ecc";
+                       resets = <&rst NAND_RESET>;
                        status = "disabled";
                };
 
@@ -767,6 +772,7 @@ qspi: spi@ff705000 {
                        cdns,fifo-width = <4>;
                        cdns,trigger-address = <0x00000000>;
                        clocks = <&qspi_clk>;
+                       resets = <&rst QSPI_RESET>;
                        status = "disabled";
                };
 
@@ -801,6 +807,7 @@ spi0: spi@fff00000 {
                        interrupts = <0 154 4>;
                        num-cs = <4>;
                        clocks = <&spi_m_clk>;
+                       resets = <&rst SPIM0_RESET>;
                        status = "disabled";
                };
 
@@ -812,6 +819,7 @@ spi1: spi@fff01000 {
                        interrupts = <0 155 4>;
                        num-cs = <4>;
                        clocks = <&spi_m_clk>;
+                       resets = <&rst SPIM1_RESET>;
                        status = "disabled";
                };
 
@@ -878,6 +886,7 @@ uart0: serial0@ffc02000 {
                        dmas = <&pdma 28>,
                               <&pdma 29>;
                        dma-names = "tx", "rx";
+                       resets = <&rst UART0_RESET>;
                };
 
                uart1: serial1@ffc03000 {
@@ -890,6 +899,7 @@ uart1: serial1@ffc03000 {
                        dmas = <&pdma 30>,
                               <&pdma 31>;
                        dma-names = "tx", "rx";
+                       resets = <&rst UART1_RESET>;
                };
 
                usbphy0: usbphy {
@@ -929,6 +939,7 @@ watchdog0: watchdog@ffd02000 {
                        reg = <0xffd02000 0x1000>;
                        interrupts = <0 171 4>;
                        clocks = <&osc1>;
+                       resets = <&rst L4WD0_RESET>;
                        status = "disabled";
                };
 
@@ -937,6 +948,7 @@ watchdog1: watchdog@ffd03000 {
                        reg = <0xffd03000 0x1000>;
                        interrupts = <0 172 4>;
                        clocks = <&osc1>;
+                       resets = <&rst L4WD1_RESET>;
                        status = "disabled";
                };
        };

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index e41fa23481c3ba0cfad8ec72535aeb7153b9ce53..ae24599d58296f4ede568c2ce91b89216c6afa5c 100644 (file)
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -470,6 +470,7 @@ gmac2: ethernet@ff804000 {
                        tx-fifo-depth = <4096>;
                        rx-fifo-depth = <16384>;
                        clocks = <&l4_mp_clk>;
+                       resets = <&rst EMAC2_RESET>;
                        clock-names = "stmmaceth";
                        snps,axi-config = <&socfpga_axi_setup>;
                        status = "disabled";
@@ -480,6 +481,7 @@ gpio0: gpio@ffc02900 {
                        #size-cells = <0>;
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xffc02900 0x100>;
+                       resets = <&rst GPIO0_RESET>;
                        status = "disabled";
 
                        porta: gpio-controller@0 {
@@ -499,6 +501,7 @@ gpio1: gpio@ffc02a00 {
                        #size-cells = <0>;
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xffc02a00 0x100>;
+                       resets = <&rst GPIO1_RESET>;
                        status = "disabled";
 
                        portb: gpio-controller@0 {
@@ -518,6 +521,7 @@ gpio2: gpio@ffc02b00 {
                        #size-cells = <0>;
                        compatible = "snps,dw-apb-gpio";
                        reg = <0xffc02b00 0x100>;
+                       resets = <&rst GPIO2_RESET>;
                        status = "disabled";
 
                        portc: gpio-controller@0 {
@@ -548,6 +552,7 @@ i2c0: i2c@ffc02200 {
                        reg = <0xffc02200 0x100>;
                        interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&l4_sp_clk>;
+                       resets = <&rst I2C0_RESET>;
                        status = "disabled";
                };
 
@@ -558,6 +563,7 @@ i2c1: i2c@ffc02300 {
                        reg = <0xffc02300 0x100>;
                        interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&l4_sp_clk>;
+                       resets = <&rst I2C1_RESET>;
                        status = "disabled";
                };
 
@@ -568,6 +574,7 @@ i2c2: i2c@ffc02400 {
                        reg = <0xffc02400 0x100>;
                        interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&l4_sp_clk>;
+                       resets = <&rst I2C2_RESET>;
                        status = "disabled";
                };
 
@@ -578,6 +585,7 @@ i2c3: i2c@ffc02500 {
                        reg = <0xffc02500 0x100>;
                        interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&l4_sp_clk>;
+                       resets = <&rst I2C3_RESET>;
                        status = "disabled";
                };
 
@@ -588,6 +596,7 @@ i2c4: i2c@ffc02600 {
                        reg = <0xffc02600 0x100>;
                        interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&l4_sp_clk>;
+                       resets = <&rst I2C4_RESET>;
                        status = "disabled";
                };
 
@@ -600,6 +609,7 @@ spi0: spi@ffda4000 {
                        num-cs = <4>;
                        /*32bit_access;*/
                        clocks = <&spi_m_clk>;
+                       resets = <&rst SPIM0_RESET>;
                        status = "disabled";
                };
 
@@ -614,6 +624,7 @@ spi1: spi@ffda5000 {
                        tx-dma-channel = <&pdma 16>;
                        rx-dma-channel = <&pdma 17>;
                        clocks = <&spi_m_clk>;
+                       resets = <&rst SPIM1_RESET>;
                        status = "disabled";
                };
 
@@ -642,6 +653,7 @@ mmc: dwmmc0@ff808000 {
                        fifo-depth = <0x400>;
                        clocks = <&l4_mp_clk>, <&sdmmc_clk>;
                        clock-names = "biu", "ciu";
+                       resets = <&rst SDMMC_RESET>;
                        status = "disabled";
                };
 
@@ -655,6 +667,7 @@ nand: nand@ffb90000 {
                        interrupts = <0 99 4>;
                        clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
                        clock-names = "nand", "nand_x", "ecc";
+                       resets = <&rst NAND_RESET>;
                        status = "disabled";
                };
 
@@ -739,6 +752,7 @@ qspi: spi@ff809000 {
                        cdns,fifo-width = <4>;
                        cdns,trigger-address = <0x00000000>;
                        clocks = <&qspi_clk>;
+                       resets = <&rst QSPI_RESET>;
                        status = "disabled";
                };
 
@@ -815,6 +829,7 @@ uart0: serial0@ffc02000 {
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&l4_sp_clk>;
+                       resets = <&rst UART0_RESET>;
                        status = "disabled";
                };
 
@@ -825,6 +840,7 @@ uart1: serial1@ffc02100 {
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&l4_sp_clk>;
+                       resets = <&rst UART1_RESET>;
                        status = "disabled";
                };
 
@@ -865,6 +881,7 @@ watchdog0: watchdog@ffd00200 {
                        reg = <0xffd00200 0x100>;
                        interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&l4_sys_free_clk>;
+                       resets = <&rst L4WD0_RESET>;
                        status = "disabled";
                };
 
@@ -873,6 +890,7 @@ watchdog1: watchdog@ffd00300 {
                        reg = <0xffd00300 0x100>;
                        interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&l4_sys_free_clk>;
+                       resets = <&rst L4WD1_RESET>;
                        status = "disabled";
                };
        };