+++ /dev/null
-Marvell Armada CP110 System Controller
-======================================
-
-The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains system controllers, which provide several registers
-giving access to numerous features: clocks, pin-muxing and many other
-SoC configuration items. This DT binding allows to describe these
-system controllers.
-
-For the top level node:
- - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the CP110 system controller
-
-SYSTEM CONTROLLER 0
-===================
-
-Clocks:
--------
-
-The Device Tree node representing this System Controller 0 provides a
-number of clocks:
-
- - a set of core clocks
- - a set of gateable clocks
-
-Those clocks can be referenced by other Device Tree nodes using two
-cells:
- - The first cell must be 0 or 1. 0 for the core clocks and 1 for the
- gateable clocks.
- - The second cell identifies the particular core clock or gateable
- clocks.
-
-The following clocks are available:
- - Core clocks
- - 0 0 APLL
- - 0 1 PPv2 core
- - 0 2 EIP
- - 0 3 Core
- - 0 4 NAND core
- - 0 5 SDIO core
- - Gateable clocks
- - 1 0 Audio
- - 1 1 Comm Unit
- - 1 2 NAND
- - 1 3 PPv2
- - 1 4 SDIO
- - 1 5 MG Domain
- - 1 6 MG Core
- - 1 7 XOR1
- - 1 8 XOR0
- - 1 9 GOP DP
- - 1 11 PCIe x1 0
- - 1 12 PCIe x1 1
- - 1 13 PCIe x4
- - 1 14 PCIe / XOR
- - 1 15 SATA
- - 1 16 SATA USB
- - 1 17 Main
- - 1 18 SD/MMC/GOP
- - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART)
- - 1 22 USB3H0
- - 1 23 USB3H1
- - 1 24 USB3 Device
- - 1 25 EIP150
- - 1 26 EIP197
-
-Required properties:
-
- - compatible: must be:
- "marvell,cp110-clock"
- - #clock-cells: must be set to 2
-
-Pinctrl:
---------
-
-For common binding part and usage, refer to the file
-Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
-
-Required properties:
-
-- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl",
- "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl"
- depending on the specific variant of the SoC being used.
-
-Available mpp pins/groups and functions:
-Note: brackets (x) are not part of the mpp name for marvell,function and given
-only for more detailed description in this document.
-
-name pins functions
-================================================================================
-mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
-mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
-mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
-mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
-mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
-mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
-mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
-mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
-mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
-mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
-mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
-mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
-mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
-mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
-mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
-mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
-mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk)
-mpp17 17 gpio, dev(ad5), ge0(txd3)
-mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
-mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
-mpp20 20 gpio, dev(ad2), ge0(txd0)
-mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
-mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
-mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
-mpp24 24 gpio, dev(a0), au(i2slrclk)
-mpp25 25 gpio, dev(oen), au(i2sdo_spdifo)
-mpp26 26 gpio, dev(wen0), au(i2sbclk)
-mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
-mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
-mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
-mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
-mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
-mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
-mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
-mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
-mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
-mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
-mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
-mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
-mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
-mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
-mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
-mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
-mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
-mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
-mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
-mpp46 46 gpio, ge1(txd1), uart1(rts)
-mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
-mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
-mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
-mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
-mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
-mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
-mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
-mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect)
-mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect)
-mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
-mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
-mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
-mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
-mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
-mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
-mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
-
-GPIO:
------
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
-
-Required properties:
-
-- compatible: "marvell,armada-8k-gpio"
-
-- offset: offset address inside the syscon block
-
-Example:
-
-CP110_LABEL(syscon0): system-controller@440000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x1000>;
-
- CP110_LABEL(clk): clock {
- compatible = "marvell,cp110-clock";
- #clock-cells = <2>;
- };
-
- CP110_LABEL(pinctrl): pinctrl {
- compatible = "marvell,armada-8k-cpm-pinctrl";
- };
-
- CP110_LABEL(gpio1): gpio@100 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x100>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
- };
-
-};
gentwo / linux / .git / commitdiff