dt-bindings: PCI: amlogic,axg-pcie: Fix select schema

The amlogic,axg-pcie binding was never enabled as the 'select' schema
expects a single compatible value, but the binding has a fallback
compatible. Fix the 'select' by adding a 'contains'. With this, several
errors in the clock and reset properties are exposed. Some of the names
aren't defined in the common DWC schema and the order of clocks entries
doesn't match .dts files.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251024011122.26001-1-robh@kernel.org

diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
index 79a21ba0f9fd62804ba95fe8a6cc3252cf652197..bee694ff45f33a3f41b515178790137b9e3c6842 100644 (file)
--- a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -20,9 +20,10 @@ allOf:
 select:
   properties:
     compatible:
-      enum:
-        - amlogic,axg-pcie
-        - amlogic,g12a-pcie
+      contains:
+        enum:
+          - amlogic,axg-pcie
+          - amlogic,g12a-pcie
   required:
     - compatible
 
@@ -51,15 +52,15 @@ properties:
 
   clocks:
     items:
+      - description: PCIe PHY clock
       - description: PCIe GEN 100M PLL clock
       - description: PCIe RC clock gate
-      - description: PCIe PHY clock
 
   clock-names:
     items:
+      - const: general
       - const: pclk
       - const: port
-      - const: general
 
   phys:
     maxItems: 1
@@ -88,7 +89,7 @@ required:
   - reg
   - reg-names
   - interrupts
-  - clock
+  - clocks
   - clock-names
   - "#address-cells"
   - "#size-cells"
@@ -115,8 +116,8 @@ examples:
         reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
         reg-names = "elbi", "cfg", "config";
         interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
-        clocks = <&pclk>, <&clk_port>, <&clk_phy>;
-        clock-names = "pclk", "port", "general";
+        clocks = <&clk_phy>, <&pclk>, <&clk_port>;
+        clock-names = "general", "pclk", "port";
         resets = <&reset_pcie_port>, <&reset_pcie_apb>;
         reset-names = "port", "apb";
         phys = <&pcie_phy>;

diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
index 34594972d8dbeb8e5069c443479d304d9fc3326e..6339a76499b21affbc6d16da19c47cbaba9f0f56 100644 (file)
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -115,11 +115,11 @@ properties:
             above for new bindings.
           oneOf:
             - description: See native 'dbi' clock for details
-              enum: [ pcie, pcie_apb_sys, aclk_dbi, reg ]
+              enum: [ pcie, pcie_apb_sys, aclk_dbi, reg, port ]
             - description: See native 'mstr/slv' clock for details
               enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ]
             - description: See native 'pipe' clock for details
-              enum: [ pcie_phy, pcie_phy_ref, link ]
+              enum: [ pcie_phy, pcie_phy_ref, link, general ]
             - description: See native 'aux' clock for details
               enum: [ pcie_aux ]
             - description: See native 'ref' clock for details.
@@ -176,7 +176,7 @@ properties:
             - description: See native 'phy' reset for details
               enum: [ pciephy, link ]
             - description: See native 'pwr' reset for details
-              enum: [ turnoff ]
+              enum: [ turnoff, port ]
 
   phys:
     description: