Driver IOCTLs
=============
-:c:macro::`PMIC_GOTO_STANDBY`
+:c:macro:`PMIC_GOTO_STANDBY`
All device resources are powered down. The processor is off, and
no voltage domains are energized.
-:c:macro::`PMIC_GOTO_LP_STANDBY`
+:c:macro:`PMIC_GOTO_LP_STANDBY`
The digital and analog functions of the PMIC, which are not
required to be always-on, are turned off (low-power).
-:c:macro::`PMIC_UPDATE_PGM`
+:c:macro:`PMIC_UPDATE_PGM`
Triggers a firmware update.
-:c:macro::`PMIC_SET_ACTIVE_STATE`
+:c:macro:`PMIC_SET_ACTIVE_STATE`
One of the operational modes.
The PMICs are fully functional and supply power to all PDN loads.
All voltage domains are energized in both MCU and Main processor
sections.
-:c:macro::`PMIC_SET_MCU_ONLY_STATE`
+:c:macro:`PMIC_SET_MCU_ONLY_STATE`
One of the operational modes.
Only the power resources assigned to the MCU Safety Island are on.
-:c:macro::`PMIC_SET_RETENTION_STATE`
+:c:macro:`PMIC_SET_RETENTION_STATE`
One of the operational modes.
Depending on the triggers set, some DDR/GPIO voltage domains can
remain energized, while all other domains are off to minimize