riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC

Add known reset configuration for existed device.

Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250617070144.1149926-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>

diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
index 1000de865d07fa5a1b4307cf73133e34ec6044ae..9a25b8c6c2f3e859c2918483280171c577c8e146 100644 (file)
--- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
@@ -36,6 +36,7 @@ gpio0: gpio@3020000 {
                        reg = <0x3020000 0x1000>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       resets = <&rst RST_GPIO0>;
 
                        porta: gpio-controller@0 {
                                compatible = "snps,dw-apb-gpio-port";
@@ -54,6 +55,7 @@ gpio1: gpio@3021000 {
                        reg = <0x3021000 0x1000>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       resets = <&rst RST_GPIO1>;
 
                        portb: gpio-controller@0 {
                                compatible = "snps,dw-apb-gpio-port";
@@ -72,6 +74,7 @@ gpio2: gpio@3022000 {
                        reg = <0x3022000 0x1000>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       resets = <&rst RST_GPIO2>;
 
                        portc: gpio-controller@0 {
                                compatible = "snps,dw-apb-gpio-port";
@@ -90,6 +93,7 @@ gpio3: gpio@3023000 {
                        reg = <0x3023000 0x1000>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       resets = <&rst RST_GPIO3>;
 
                        portd: gpio-controller@0 {
                                compatible = "snps,dw-apb-gpio-port";
@@ -133,6 +137,7 @@ i2c0: i2c@4000000 {
                        clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
                        clock-names = "ref", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_I2C0>;
                        status = "disabled";
                };
 
@@ -144,6 +149,7 @@ i2c1: i2c@4010000 {
                        clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
                        clock-names = "ref", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_I2C1>;
                        status = "disabled";
                };
 
@@ -155,6 +161,7 @@ i2c2: i2c@4020000 {
                        clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
                        clock-names = "ref", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_I2C2>;
                        status = "disabled";
                };
 
@@ -166,6 +173,7 @@ i2c3: i2c@4030000 {
                        clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
                        clock-names = "ref", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_I2C3>;
                        status = "disabled";
                };
 
@@ -177,6 +185,7 @@ i2c4: i2c@4040000 {
                        clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
                        clock-names = "ref", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_I2C4>;
                        status = "disabled";
                };
 
@@ -188,6 +197,7 @@ uart0: serial@4140000 {
                        clock-names = "baudclk", "apb_pclk";
                        reg-shift = <2>;
                        reg-io-width = <4>;
+                       resets = <&rst RST_UART0>;
                        status = "disabled";
                };
 
@@ -199,6 +209,7 @@ uart1: serial@4150000 {
                        clock-names = "baudclk", "apb_pclk";
                        reg-shift = <2>;
                        reg-io-width = <4>;
+                       resets = <&rst RST_UART1>;
                        status = "disabled";
                };
 
@@ -210,6 +221,7 @@ uart2: serial@4160000 {
                        clock-names = "baudclk", "apb_pclk";
                        reg-shift = <2>;
                        reg-io-width = <4>;
+                       resets = <&rst RST_UART2>;
                        status = "disabled";
                };
 
@@ -221,6 +233,7 @@ uart3: serial@4170000 {
                        clock-names = "baudclk", "apb_pclk";
                        reg-shift = <2>;
                        reg-io-width = <4>;
+                       resets = <&rst RST_UART3>;
                        status = "disabled";
                };
 
@@ -232,6 +245,7 @@ spi0: spi@4180000 {
                        clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
                        clock-names = "ssi_clk", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_SPI0>;
                        status = "disabled";
                };
 
@@ -243,6 +257,7 @@ spi1: spi@4190000 {
                        clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
                        clock-names = "ssi_clk", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_SPI1>;
                        status = "disabled";
                };
 
@@ -254,6 +269,7 @@ spi2: spi@41a0000 {
                        clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
                        clock-names = "ssi_clk", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_SPI2>;
                        status = "disabled";
                };
 
@@ -265,6 +281,7 @@ spi3: spi@41b0000 {
                        clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
                        clock-names = "ssi_clk", "pclk";
                        interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&rst RST_SPI3>;
                        status = "disabled";
                };
 
@@ -276,6 +293,7 @@ uart4: serial@41c0000 {
                        clock-names = "baudclk", "apb_pclk";
                        reg-shift = <2>;
                        reg-io-width = <4>;
+                       resets = <&rst RST_UART4>;
                        status = "disabled";
                };