regulator: dt-bindings: pca9540: add debounce timer configuration

Make the different debounce timers configurable from the devicetree.
Depending on the board design, these have to be set different than the
default register values.

Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117202215.1936139-1-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index 863717984a79d9ad7838eeecd0ba3e40fc9e558f..ec04adfb9d1cbb149cac48ba223f6106343d4c19 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -139,6 +139,30 @@ properties:
       When WDOG_B signal is asserted a warm reset will be done instead of cold
       reset.
 
+  nxp,pmic-on-req-on-debounce-us:
+    enum: [ 120, 20000, 100000, 750000 ]
+    description: Debounce time for PMIC_ON_REQ high.
+
+  nxp,pmic-on-req-off-debounce-us:
+    enum: [ 120, 2000 ]
+    description: Debounce time for PMIC_ON_REQ is asserted low
+
+  nxp,power-on-step-ms:
+    enum: [ 1, 2, 4, 8]
+    description: Time step configuration during power on sequence
+
+  nxp,power-down-step-ms:
+    enum: [ 2, 4, 8, 16 ]
+    description: Time step configuration during power down sequence
+
+  nxp,restart-ms:
+    enum: [ 250, 500 ]
+    description: Time to stay off regulators during Cold reset
+
+  npx,pmic-rst-b-debounce-ms:
+    enum: [ 10, 50, 100, 500, 1000, 2000, 4000, 8000 ]
+    description: PMIC_RST_B debounce time
+
 required:
   - compatible
   - reg