arm64: dts: qcom: msm8996: remove unit name for thermal trip points

The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.

arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
m4m-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
l3-or-venus-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cluster0-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
modemtx-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
m4m-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
l3-or-venus-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cluster0-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
modemtx-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/2c0aa5357c96c3caff8554f9ef3ab9c5a2b8d2f8.1585562459.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 14827adebd94a0a98f590e9d52d412def15f0aba..895202d07a8b864ddc4528a1a79936dc6f130715 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2178,7 +2178,7 @@ cpu0-thermal {
                        thermal-sensors = <&tsens0 3>;
 
                        trips {
-                               cpu0_alert0: trip-point@0 {
+                               cpu0_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -2199,7 +2199,7 @@ cpu1-thermal {
                        thermal-sensors = <&tsens0 5>;
 
                        trips {
-                               cpu1_alert0: trip-point@0 {
+                               cpu1_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -2220,7 +2220,7 @@ cpu2-thermal {
                        thermal-sensors = <&tsens0 8>;
 
                        trips {
-                               cpu2_alert0: trip-point@0 {
+                               cpu2_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -2241,7 +2241,7 @@ cpu3-thermal {
                        thermal-sensors = <&tsens0 10>;
 
                        trips {
-                               cpu3_alert0: trip-point@0 {
+                               cpu3_alert0: trip-point0 {
                                        temperature = <75000>;
                                        hysteresis = <2000>;
                                        type = "passive";
@@ -2262,7 +2262,7 @@ gpu-thermal-top {
                        thermal-sensors = <&tsens1 6>;
 
                        trips {
-                               gpu1_alert0: trip-point@0 {
+                               gpu1_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2277,7 +2277,7 @@ gpu-thermal-bottom {
                        thermal-sensors = <&tsens1 7>;
 
                        trips {
-                               gpu2_alert0: trip-point@0 {
+                               gpu2_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2292,7 +2292,7 @@ m4m-thermal {
                        thermal-sensors = <&tsens0 1>;
 
                        trips {
-                               m4m_alert0: trip-point@0 {
+                               m4m_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2307,7 +2307,7 @@ l3-or-venus-thermal {
                        thermal-sensors = <&tsens0 2>;
 
                        trips {
-                               l3_or_venus_alert0: trip-point@0 {
+                               l3_or_venus_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2322,7 +2322,7 @@ cluster0-l2-thermal {
                        thermal-sensors = <&tsens0 7>;
 
                        trips {
-                               cluster0_l2_alert0: trip-point@0 {
+                               cluster0_l2_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2337,7 +2337,7 @@ cluster1-l2-thermal {
                        thermal-sensors = <&tsens0 12>;
 
                        trips {
-                               cluster1_l2_alert0: trip-point@0 {
+                               cluster1_l2_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2352,7 +2352,7 @@ camera-thermal {
                        thermal-sensors = <&tsens1 1>;
 
                        trips {
-                               camera_alert0: trip-point@0 {
+                               camera_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2367,7 +2367,7 @@ q6-dsp-thermal {
                        thermal-sensors = <&tsens1 2>;
 
                        trips {
-                               q6_dsp_alert0: trip-point@0 {
+                               q6_dsp_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2382,7 +2382,7 @@ mem-thermal {
                        thermal-sensors = <&tsens1 3>;
 
                        trips {
-                               mem_alert0: trip-point@0 {
+                               mem_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";
@@ -2397,7 +2397,7 @@ modemtx-thermal {
                        thermal-sensors = <&tsens1 4>;
 
                        trips {
-                               modemtx_alert0: trip-point@0 {
+                               modemtx_alert0: trip-point0 {
                                        temperature = <90000>;
                                        hysteresis = <2000>;
                                        type = "hot";