MIPS: dts: loongson: Fix liointc IRQ polarity

All internal liointc interrupts are high level triggered.

Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index f5a74338bf0598410276afcb85291bd3a58731f3..3f5255584c30898b2cd239f11a2134adae52d9ee 100644 (file)
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -93,7 +93,7 @@ rtc0: rtc@1fe07800 {
                        compatible = "loongson,ls2k1000-rtc";
                        reg = <0 0x1fe07800 0 0x78>;
                        interrupt-parent = <&liointc0>;
-                       interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+                       interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                uart0: serial@1fe00000 {
@@ -101,7 +101,7 @@ uart0: serial@1fe00000 {
                        reg = <0 0x1fe00000 0 0x8>;
                        clock-frequency = <125000000>;
                        interrupt-parent = <&liointc0>;
-                       interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                       interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
                        no-loopback-test;
                };
 
@@ -124,8 +124,8 @@ gmac@3,0 {
                                                   "pciclass0c03";
 
                                reg = <0x1800 0x0 0x0 0x0 0x0>;
-                               interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
-                                            <13 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+                                            <13 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-names = "macirq", "eth_lpi";
                                interrupt-parent = <&liointc0>;
                                phy-mode = "rgmii";
@@ -147,8 +147,8 @@ gmac@3,1 {
                                                   "loongson, pci-gmac";
 
                                reg = <0x1900 0x0 0x0 0x0 0x0>;
-                               interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
-                                            <15 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+                                            <15 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-names = "macirq", "eth_lpi";
                                interrupt-parent = <&liointc0>;
                                phy-mode = "rgmii";
@@ -169,7 +169,7 @@ ehci@4,1 {
                                                   "pciclass0c03";
 
                                reg = <0x2100 0x0 0x0 0x0 0x0>;
-                               interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc1>;
                        };
 
@@ -180,7 +180,7 @@ ohci@4,2 {
                                                   "pciclass0c03";
 
                                reg = <0x2200 0x0 0x0 0x0 0x0>;
-                               interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc1>;
                        };
 
@@ -191,7 +191,7 @@ sata@8,0 {
                                                   "pciclass0106";
 
                                reg = <0x4000 0x0 0x0 0x0 0x0>;
-                               interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc0>;
                        };
 
@@ -206,10 +206,10 @@ pcie@9,0 {
                                #size-cells = <2>;
                                device_type = "pci";
                                #interrupt-cells = <1>;
-                               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc1>;
                                interrupt-map-mask = <0 0 0 0>;
-                               interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+                               interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>;
                                ranges;
                                external-facing;
                        };
@@ -225,10 +225,10 @@ pcie@a,0 {
                                #size-cells = <2>;
                                device_type = "pci";
                                #interrupt-cells = <1>;
-                               interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc1>;
                                interrupt-map-mask = <0 0 0 0>;
-                               interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+                               interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
                                ranges;
                                external-facing;
                        };
@@ -244,10 +244,10 @@ pcie@b,0 {
                                #size-cells = <2>;
                                device_type = "pci";
                                #interrupt-cells = <1>;
-                               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc1>;
                                interrupt-map-mask = <0 0 0 0>;
-                               interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+                               interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
                                ranges;
                                external-facing;
                        };
@@ -263,10 +263,10 @@ pcie@c,0 {
                                #size-cells = <2>;
                                device_type = "pci";
                                #interrupt-cells = <1>;
-                               interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc1>;
                                interrupt-map-mask = <0 0 0 0>;
-                               interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+                               interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
                                ranges;
                                external-facing;
                        };
@@ -282,10 +282,10 @@ pcie@d,0 {
                                #size-cells = <2>;
                                device_type = "pci";
                                #interrupt-cells = <1>;
-                               interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc1>;
                                interrupt-map-mask = <0 0 0 0>;
-                               interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+                               interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
                                ranges;
                                external-facing;
                        };
@@ -301,10 +301,10 @@ pcie@e,0 {
                                #size-cells = <2>;
                                device_type = "pci";
                                #interrupt-cells = <1>;
-                               interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+                               interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
                                interrupt-parent = <&liointc1>;
                                interrupt-map-mask = <0 0 0 0>;
-                               interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+                               interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
                                ranges;
                                external-facing;
                        };