]> Gentwo Git Trees - linux/.git/commitdiff
ARM: dts: vexpress: fix few unit address format warnings
authorSudeep Holla <sudeep.holla@arm.com>
Thu, 13 Apr 2017 17:12:24 +0000 (18:12 +0100)
committerSudeep Holla <sudeep.holla@arm.com>
Wed, 19 Apr 2017 11:08:37 +0000 (12:08 +0100)
This patch fixes the following set of warnings on vexpress platforms:

 sysreg@010000 simple-bus unit address format error, expected "10000"
 sysctl@020000 simple-bus unit address format error, expected "20000"
 i2c@030000 simple-bus unit address format error, expected "30000"
 aaci@040000 simple-bus unit address format error, expected "40000"
 mmci@050000 simple-bus unit address format error, expected "50000"
 kmi@060000 simple-bus unit address format error, expected "60000"
 kmi@070000 simple-bus unit address format error, expected "70000"
 uart@090000 simple-bus unit address format error, expected "90000"
 uart@0a0000 simple-bus unit address format error, expected "a0000"
 uart@0b0000 simple-bus unit address format error, expected "b0000"
 uart@0c0000 simple-bus unit address format error, expected "c0000"
 wdt@0f0000 simple-bus unit address format error, expected "f0000"

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
arch/arm/boot/dts/vexpress-v2m.dtsi
arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
arch/arm/boot/dts/vexpress-v2p-ca5s.dts
arch/arm/boot/dts/vexpress-v2p-ca9.dts

index 3086efacd00e09ab388078625127af568f62214c..35714ff6f4677dfd6ee80af87c0db546dc360b85 100644 (file)
@@ -71,7 +71,7 @@ iofpga@3,00000000 {
                        #size-cells = <1>;
                        ranges = <0 3 0 0x200000>;
 
-                       v2m_sysreg: sysreg@010000 {
+                       v2m_sysreg: sysreg@10000 {
                                compatible = "arm,vexpress-sysreg";
                                reg = <0x010000 0x1000>;
 
@@ -94,7 +94,7 @@ v2m_flash_gpios: sys_flash {
                                };
                        };
 
-                       v2m_sysctl: sysctl@020000 {
+                       v2m_sysctl: sysctl@20000 {
                                compatible = "arm,sp810", "arm,primecell";
                                reg = <0x020000 0x1000>;
                                clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -106,7 +106,7 @@ v2m_sysctl: sysctl@020000 {
                        };
 
                        /* PCI-E I2C bus */
-                       v2m_i2c_pcie: i2c@030000 {
+                       v2m_i2c_pcie: i2c@30000 {
                                compatible = "arm,versatile-i2c";
                                reg = <0x030000 0x1000>;
 
@@ -119,7 +119,7 @@ pcie-switch@60 {
                                };
                        };
 
-                       aaci@040000 {
+                       aaci@40000 {
                                compatible = "arm,pl041", "arm,primecell";
                                reg = <0x040000 0x1000>;
                                interrupts = <11>;
@@ -127,7 +127,7 @@ aaci@040000 {
                                clock-names = "apb_pclk";
                        };
 
-                       mmci@050000 {
+                       mmci@50000 {
                                compatible = "arm,pl180", "arm,primecell";
                                reg = <0x050000 0x1000>;
                                interrupts = <9 10>;
@@ -139,7 +139,7 @@ mmci@050000 {
                                clock-names = "mclk", "apb_pclk";
                        };
 
-                       kmi@060000 {
+                       kmi@60000 {
                                compatible = "arm,pl050", "arm,primecell";
                                reg = <0x060000 0x1000>;
                                interrupts = <12>;
@@ -147,7 +147,7 @@ kmi@060000 {
                                clock-names = "KMIREFCLK", "apb_pclk";
                        };
 
-                       kmi@070000 {
+                       kmi@70000 {
                                compatible = "arm,pl050", "arm,primecell";
                                reg = <0x070000 0x1000>;
                                interrupts = <13>;
@@ -155,7 +155,7 @@ kmi@070000 {
                                clock-names = "KMIREFCLK", "apb_pclk";
                        };
 
-                       v2m_serial0: uart@090000 {
+                       v2m_serial0: uart@90000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x090000 0x1000>;
                                interrupts = <5>;
@@ -163,7 +163,7 @@ v2m_serial0: uart@090000 {
                                clock-names = "uartclk", "apb_pclk";
                        };
 
-                       v2m_serial1: uart@0a0000 {
+                       v2m_serial1: uart@a0000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x0a0000 0x1000>;
                                interrupts = <6>;
@@ -171,7 +171,7 @@ v2m_serial1: uart@0a0000 {
                                clock-names = "uartclk", "apb_pclk";
                        };
 
-                       v2m_serial2: uart@0b0000 {
+                       v2m_serial2: uart@b0000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x0b0000 0x1000>;
                                interrupts = <7>;
@@ -179,7 +179,7 @@ v2m_serial2: uart@0b0000 {
                                clock-names = "uartclk", "apb_pclk";
                        };
 
-                       v2m_serial3: uart@0c0000 {
+                       v2m_serial3: uart@c0000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x0c0000 0x1000>;
                                interrupts = <8>;
@@ -187,7 +187,7 @@ v2m_serial3: uart@0c0000 {
                                clock-names = "uartclk", "apb_pclk";
                        };
 
-                       wdt@0f0000 {
+                       wdt@f0000 {
                                compatible = "arm,sp805", "arm,primecell";
                                reg = <0x0f0000 0x1000>;
                                interrupts = <0>;
index c6393d3f17191c86eeaedd114fd55239766b4690..1b6f6393be936d1114ea2dd5235eb18d70165cf9 100644 (file)
@@ -70,7 +70,7 @@ iofpga@7,00000000 {
                        #size-cells = <1>;
                        ranges = <0 7 0 0x20000>;
 
-                       v2m_sysreg: sysreg@00000 {
+                       v2m_sysreg: sysreg@0 {
                                compatible = "arm,vexpress-sysreg";
                                reg = <0x00000 0x1000>;
 
@@ -93,7 +93,7 @@ v2m_flash_gpios: sys_flash {
                                };
                        };
 
-                       v2m_sysctl: sysctl@01000 {
+                       v2m_sysctl: sysctl@1000 {
                                compatible = "arm,sp810", "arm,primecell";
                                reg = <0x01000 0x1000>;
                                clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -105,7 +105,7 @@ v2m_sysctl: sysctl@01000 {
                        };
 
                        /* PCI-E I2C bus */
-                       v2m_i2c_pcie: i2c@02000 {
+                       v2m_i2c_pcie: i2c@2000 {
                                compatible = "arm,versatile-i2c";
                                reg = <0x02000 0x1000>;
 
@@ -118,7 +118,7 @@ pcie-switch@60 {
                                };
                        };
 
-                       aaci@04000 {
+                       aaci@4000 {
                                compatible = "arm,pl041", "arm,primecell";
                                reg = <0x04000 0x1000>;
                                interrupts = <11>;
@@ -126,7 +126,7 @@ aaci@04000 {
                                clock-names = "apb_pclk";
                        };
 
-                       mmci@05000 {
+                       mmci@5000 {
                                compatible = "arm,pl180", "arm,primecell";
                                reg = <0x05000 0x1000>;
                                interrupts = <9 10>;
@@ -138,7 +138,7 @@ mmci@05000 {
                                clock-names = "mclk", "apb_pclk";
                        };
 
-                       kmi@06000 {
+                       kmi@6000 {
                                compatible = "arm,pl050", "arm,primecell";
                                reg = <0x06000 0x1000>;
                                interrupts = <12>;
@@ -146,7 +146,7 @@ kmi@06000 {
                                clock-names = "KMIREFCLK", "apb_pclk";
                        };
 
-                       kmi@07000 {
+                       kmi@7000 {
                                compatible = "arm,pl050", "arm,primecell";
                                reg = <0x07000 0x1000>;
                                interrupts = <13>;
@@ -154,7 +154,7 @@ kmi@07000 {
                                clock-names = "KMIREFCLK", "apb_pclk";
                        };
 
-                       v2m_serial0: uart@09000 {
+                       v2m_serial0: uart@9000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x09000 0x1000>;
                                interrupts = <5>;
@@ -162,7 +162,7 @@ v2m_serial0: uart@09000 {
                                clock-names = "uartclk", "apb_pclk";
                        };
 
-                       v2m_serial1: uart@0a000 {
+                       v2m_serial1: uart@a000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x0a000 0x1000>;
                                interrupts = <6>;
@@ -170,7 +170,7 @@ v2m_serial1: uart@0a000 {
                                clock-names = "uartclk", "apb_pclk";
                        };
 
-                       v2m_serial2: uart@0b000 {
+                       v2m_serial2: uart@b000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x0b000 0x1000>;
                                interrupts = <7>;
@@ -178,7 +178,7 @@ v2m_serial2: uart@0b000 {
                                clock-names = "uartclk", "apb_pclk";
                        };
 
-                       v2m_serial3: uart@0c000 {
+                       v2m_serial3: uart@c000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x0c000 0x1000>;
                                interrupts = <8>;
@@ -186,7 +186,7 @@ v2m_serial3: uart@0c000 {
                                clock-names = "uartclk", "apb_pclk";
                        };
 
-                       wdt@0f000 {
+                       wdt@f000 {
                                compatible = "arm,sp805", "arm,primecell";
                                reg = <0x0f000 0x1000>;
                                interrupts = <0>;
index 15f4fd3f469561caa7fba30fed8c6a10c18c6668..0c8de0ca73ee8a67f1c7c419d8de28590888ebfd 100644 (file)
@@ -220,7 +220,7 @@ energy {
                };
        };
 
-       smb@08000000 {
+       smb@8000000 {
                compatible = "simple-bus";
 
                #address-cells = <2>;
index bd107c5a02267f33a02e31e0e5fd116672684d73..65ecf206388cc3b4ae1885daa67235b9bcdd1621 100644 (file)
@@ -385,7 +385,7 @@ energy-a7 {
                };
        };
 
-       etb@0,20010000 {
+       etb@20010000 {
                compatible = "arm,coresight-etb10", "arm,primecell";
                reg = <0 0x20010000 0 0x1000>;
 
@@ -399,7 +399,7 @@ etb_in_port: endpoint {
                };
        };
 
-       tpiu@0,20030000 {
+       tpiu@20030000 {
                compatible = "arm,coresight-tpiu", "arm,primecell";
                reg = <0 0x20030000 0 0x1000>;
 
@@ -449,7 +449,7 @@ replicator_in_port0: endpoint {
                };
        };
 
-       funnel@0,20040000 {
+       funnel@20040000 {
                compatible = "arm,coresight-funnel", "arm,primecell";
                reg = <0 0x20040000 0 0x1000>;
 
@@ -513,7 +513,7 @@ funnel_in_port5: endpoint {
                };
        };
 
-       ptm@0,2201c000 {
+       ptm@2201c000 {
                compatible = "arm,coresight-etm3x", "arm,primecell";
                reg = <0 0x2201c000 0 0x1000>;
 
@@ -527,7 +527,7 @@ ptm0_out_port: endpoint {
                };
        };
 
-       ptm@0,2201d000 {
+       ptm@2201d000 {
                compatible = "arm,coresight-etm3x", "arm,primecell";
                reg = <0 0x2201d000 0 0x1000>;
 
@@ -541,7 +541,7 @@ ptm1_out_port: endpoint {
                };
        };
 
-       etm@0,2203c000 {
+       etm@2203c000 {
                compatible = "arm,coresight-etm3x", "arm,primecell";
                reg = <0 0x2203c000 0 0x1000>;
 
@@ -555,7 +555,7 @@ etm0_out_port: endpoint {
                };
        };
 
-       etm@0,2203d000 {
+       etm@2203d000 {
                compatible = "arm,coresight-etm3x", "arm,primecell";
                reg = <0 0x2203d000 0 0x1000>;
 
@@ -569,7 +569,7 @@ etm1_out_port: endpoint {
                };
        };
 
-       etm@0,2203e000 {
+       etm@2203e000 {
                compatible = "arm,coresight-etm3x", "arm,primecell";
                reg = <0 0x2203e000 0 0x1000>;
 
@@ -583,7 +583,7 @@ etm2_out_port: endpoint {
                };
        };
 
-       smb@08000000 {
+       smb@8000000 {
                compatible = "simple-bus";
 
                #address-cells = <2>;
index 1acecaf4b13d8a349616b3e78f7f62c1dc9556c2..6e69b8e6c1a7891af21b5b861128bef18cf89b96 100644 (file)
@@ -190,7 +190,7 @@ temp-dcc {
                };
        };
 
-       smb@08000000 {
+       smb@8000000 {
                compatible = "simple-bus";
 
                #address-cells = <2>;
index b608a03ee02f73f0c8d39ca546e163e9ed6053b2..c9305b58afc23d8733d6d5ee600127b5a8888248 100644 (file)
@@ -300,7 +300,7 @@ power-vd10-s3 {
                };
        };
 
-       smb@04000000 {
+       smb@4000000 {
                compatible = "simple-bus";
 
                #address-cells = <2>;