From: Geert Uytterhoeven Date: Tue, 4 Aug 2015 12:28:10 +0000 (+0200) Subject: ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain X-Git-Tag: v4.3-rc1~120^2~5^2~3 X-Git-Url: https://gentwo.org/gitweb/?a=commitdiff_plain;h=484adb005886b1db79050afc7074d2356618b0c2;p=linux%2F.git ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain Add an appropriate "#power-domain-cells" property to the cpg_clocks device node, to create the CPG/MSTP Clock Domain. Add "power-domains" properties to all device nodes for devices that are part of the CPG/MSTP Clock Domain and can be power-managed through an MSTP clock. This applies to most on-SoC devices, which have a one-to-one mapping from SoC device to DT device node. Notable exceptions are the "display" and "sound" nodes, which represent multiple SoC devices, each having their own MSTP clocks. Signed-off-by: Geert Uytterhoeven Reviewed-by: Ulf Hansson Signed-off-by: Simon Horman --- diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 5b2952d5c700..a0b2a79cbfbd 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -134,6 +134,7 @@ gpio0: gpio@e6050000 { #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; + power-domains = <&cpg_clocks>; }; gpio1: gpio@e6051000 { @@ -146,6 +147,7 @@ gpio1: gpio@e6051000 { #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; + power-domains = <&cpg_clocks>; }; gpio2: gpio@e6052000 { @@ -158,6 +160,7 @@ gpio2: gpio@e6052000 { #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; + power-domains = <&cpg_clocks>; }; gpio3: gpio@e6053000 { @@ -170,6 +173,7 @@ gpio3: gpio@e6053000 { #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; + power-domains = <&cpg_clocks>; }; gpio4: gpio@e6054000 { @@ -182,6 +186,7 @@ gpio4: gpio@e6054000 { #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; + power-domains = <&cpg_clocks>; }; gpio5: gpio@e6055000 { @@ -194,6 +199,7 @@ gpio5: gpio@e6055000 { #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; + power-domains = <&cpg_clocks>; }; thermal@e61f0000 { @@ -201,6 +207,7 @@ thermal@e61f0000 { reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; + power-domains = <&cpg_clocks>; }; timer { @@ -218,6 +225,7 @@ cmt0: timer@ffca0000 { <0 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; renesas,channels-mask = <0x60>; @@ -237,6 +245,7 @@ cmt1: timer@e6130000 { <0 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_CMT1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; renesas,channels-mask = <0xff>; @@ -253,6 +262,7 @@ irqc0: interrupt-controller@e61c0000 { <0 2 IRQ_TYPE_LEVEL_HIGH>, <0 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7790_CLK_IRQC>; + power-domains = <&cpg_clocks>; }; dmac0: dma-controller@e6700000 { @@ -281,6 +291,7 @@ dmac0: dma-controller@e6700000 { "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <15>; }; @@ -311,6 +322,7 @@ dmac1: dma-controller@e6720000 { "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <15>; }; @@ -339,6 +351,7 @@ audma0: dma-controller@ec700000 { "ch12"; clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <13>; }; @@ -367,6 +380,7 @@ audma1: dma-controller@ec720000 { "ch12"; clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <13>; }; @@ -378,6 +392,7 @@ usb_dmac0: dma-controller@e65a0000 { 0 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <2>; }; @@ -389,6 +404,7 @@ usb_dmac1: dma-controller@e65b0000 { 0 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <2>; }; @@ -400,6 +416,7 @@ i2c0: i2c@e6508000 { reg = <0 0xe6508000 0 0x40>; interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -410,6 +427,7 @@ i2c1: i2c@e6518000 { reg = <0 0xe6518000 0 0x40>; interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -420,6 +438,7 @@ i2c2: i2c@e6530000 { reg = <0 0xe6530000 0 0x40>; interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -430,6 +449,7 @@ i2c3: i2c@e6540000 { reg = <0 0xe6540000 0 0x40>; interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -442,6 +462,7 @@ iic0: i2c@e6500000 { clocks = <&mstp3_clks R8A7790_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -454,6 +475,7 @@ iic1: i2c@e6510000 { clocks = <&mstp3_clks R8A7790_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -466,6 +488,7 @@ iic2: i2c@e6520000 { clocks = <&mstp3_clks R8A7790_CLK_IIC2>; dmas = <&dmac0 0x69>, <&dmac0 0x6a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -478,6 +501,7 @@ iic3: i2c@e60b0000 { clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -488,6 +512,7 @@ mmcif0: mmc@ee200000 { clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -500,6 +525,7 @@ mmcif1: mmc@ee220000 { clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -517,6 +543,7 @@ sdhi0: sd@ee100000 { clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -527,6 +554,7 @@ sdhi1: sd@ee120000 { clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -537,6 +565,7 @@ sdhi2: sd@ee140000 { clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -547,6 +576,7 @@ sdhi3: sd@ee160000 { clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -558,6 +588,7 @@ scifa0: serial@e6c40000 { clock-names = "sci_ick"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -569,6 +600,7 @@ scifa1: serial@e6c50000 { clock-names = "sci_ick"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -580,6 +612,7 @@ scifa2: serial@e6c60000 { clock-names = "sci_ick"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -591,6 +624,7 @@ scifb0: serial@e6c20000 { clock-names = "sci_ick"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -602,6 +636,7 @@ scifb1: serial@e6c30000 { clock-names = "sci_ick"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -613,6 +648,7 @@ scifb2: serial@e6ce0000 { clock-names = "sci_ick"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -624,6 +660,7 @@ scif0: serial@e6e60000 { clock-names = "sci_ick"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -635,6 +672,7 @@ scif1: serial@e6e68000 { clock-names = "sci_ick"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -646,6 +684,7 @@ hscif0: serial@e62c0000 { clock-names = "sci_ick"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -657,6 +696,7 @@ hscif1: serial@e62c8000 { clock-names = "sci_ick"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -665,6 +705,7 @@ ether: ethernet@ee700000 { reg = <0 0xee700000 0 0x400>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHER>; + power-domains = <&cpg_clocks>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -676,6 +717,7 @@ avb: ethernet@e6800000 { reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -686,6 +728,7 @@ sata0: sata@ee300000 { reg = <0 0xee300000 0 0x2000>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -694,6 +737,7 @@ sata1: sata@ee500000 { reg = <0 0xee500000 0 0x2000>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -702,12 +746,13 @@ hsusb: usb@e6590000 { reg = <0 0xe6590000 0 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; - renesas,buswait = <4>; - phys = <&usb0 1>; - phy-names = "usb"; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&cpg_clocks>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; status = "disabled"; }; @@ -718,6 +763,7 @@ usbphy: usb-phy@e6590100 { #size-cells = <0>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; clock-names = "usbhs"; + power-domains = <&cpg_clocks>; status = "disabled"; usb0: usb-channel@0 { @@ -732,33 +778,37 @@ usb2: usb-channel@2 { vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7790"; - clocks = <&mstp8_clks R8A7790_CLK_VIN0>; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7790"; - clocks = <&mstp8_clks R8A7790_CLK_VIN1>; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7790"; - clocks = <&mstp8_clks R8A7790_CLK_VIN2>; reg = <0 0xe6ef2000 0 0x1000>; interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; vin3: video@e6ef3000 { compatible = "renesas,vin-r8a7790"; - clocks = <&mstp8_clks R8A7790_CLK_VIN3>; reg = <0 0xe6ef3000 0 0x1000>; interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -767,6 +817,7 @@ vsp1@fe920000 { reg = <0 0xfe920000 0 0x8000>; interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; + power-domains = <&cpg_clocks>; renesas,has-sru; renesas,#rpf = <5>; @@ -779,6 +830,7 @@ vsp1@fe928000 { reg = <0 0xfe928000 0 0x8000>; interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; + power-domains = <&cpg_clocks>; renesas,has-lut; renesas,has-sru; @@ -792,6 +844,7 @@ vsp1@fe930000 { reg = <0 0xfe930000 0 0x8000>; interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; + power-domains = <&cpg_clocks>; renesas,has-lif; renesas,has-lut; @@ -805,6 +858,7 @@ vsp1@fe938000 { reg = <0 0xfe938000 0 0x8000>; interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; + power-domains = <&cpg_clocks>; renesas,has-lif; renesas,has-lut; @@ -859,6 +913,7 @@ can0: can@e6e80000 { clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -869,6 +924,7 @@ can1: can@e6e88000 { clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -877,6 +933,7 @@ jpu: jpeg-codec@fe980000 { reg = <0 0xfe980000 0 0x10300>; interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_JPU>; + power-domains = <&cpg_clocks>; }; clocks { @@ -953,6 +1010,7 @@ cpg_clocks: cpg_clocks@e6150000 { clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", "adsp"; + #power-domain-cells = <0>; }; /* Variable factor clocks */ @@ -1343,6 +1401,7 @@ qspi: spi@e6b10000 { clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1356,6 +1415,7 @@ msiof0: spi@e6e20000 { clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1368,6 +1428,7 @@ msiof1: spi@e6e10000 { clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1380,6 +1441,7 @@ msiof2: spi@e6e00000 { clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1392,6 +1454,7 @@ msiof3: spi@e6c90000 { clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1402,6 +1465,7 @@ xhci: usb@ee000000 { reg = <0 0xee000000 0 0xc00>; interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + power-domains = <&cpg_clocks>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1410,10 +1474,11 @@ xhci: usb@ee000000 { pci0: pci@ee090000 { compatible = "renesas,pci-r8a7790"; device_type = "pci"; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + power-domains = <&cpg_clocks>; status = "disabled"; bus-range = <0 0>; @@ -1444,10 +1509,11 @@ usb@0,2 { pci1: pci@ee0b0000 { compatible = "renesas,pci-r8a7790"; device_type = "pci"; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; reg = <0 0xee0b0000 0 0xc00>, <0 0xee0a0000 0 0x1100>; interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + power-domains = <&cpg_clocks>; status = "disabled"; bus-range = <1 1>; @@ -1465,6 +1531,7 @@ pci2: pci@ee0d0000 { compatible = "renesas,pci-r8a7790"; device_type = "pci"; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + power-domains = <&cpg_clocks>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; @@ -1517,6 +1584,7 @@ pciec: pcie@fe000000 { interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; + power-domains = <&cpg_clocks>; status = "disabled"; };