From: Abinash Singh <abinashsinghlalotra@gmail.com>
Date: Wed, 6 Aug 2025 21:51:33 +0000 (+0530)
Subject: serial: 8250_platform: Reduce stack usage in serial8250_probe_acpi()
X-Git-Tag: v6.18-rc1~77^2~40
X-Git-Url: https://gentwo.org/gitweb/?a=commitdiff_plain;h=d9b7679611d320db4f4436f0281a7797f2e06e15;p=linux%2F.git

serial: 8250_platform: Reduce stack usage in serial8250_probe_acpi()

The function serial8250_probe_acpi() in 8250_platform.c triggered a
    frame size warning:
drivers/tty/serial/8250/8250_platform.c: In function ‘serial8250_probe_acpi’:
drivers/tty/serial/8250/8250_platform.c:152:1: warning: the frame size of 1160 bytes is larger than 1024 bytes [-Wframe-larger-than=]

This patch reduces the stack usage by dynamically allocating the
`uart` structure using kzalloc(), rather than placing it on
the stack. This eliminates the overflow warning and improves kernel
robustness.

Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250806215134.4921-2-abinashsinghlalotra@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/tty/serial/8250/8250_platform.c b/drivers/tty/serial/8250/8250_platform.c
index c0343bfb8064..9938aeb917d8 100644
--- a/drivers/tty/serial/8250/8250_platform.c
+++ b/drivers/tty/serial/8250/8250_platform.c
@@ -10,6 +10,7 @@
  */
 #include <linux/acpi.h>
 #include <linux/array_size.h>
+#include <linux/cleanup.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -110,41 +111,44 @@ void __init serial8250_isa_init_ports(void)
 static int serial8250_probe_acpi(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct uart_8250_port uart = { };
 	struct resource *regs;
 	int ret, line;
 
+	struct uart_8250_port *uart __free(kfree) = kzalloc(sizeof(*uart), GFP_KERNEL);
+	if (!uart)
+		return -ENOMEM;
+
 	regs = platform_get_mem_or_io(pdev, 0);
 	if (!regs)
 		return dev_err_probe(dev, -EINVAL, "no registers defined\n");
 
 	switch (resource_type(regs)) {
 	case IORESOURCE_IO:
-		uart.port.iobase = regs->start;
+		uart->port.iobase = regs->start;
 		break;
 	case IORESOURCE_MEM:
-		uart.port.mapbase = regs->start;
-		uart.port.mapsize = resource_size(regs);
-		uart.port.flags = UPF_IOREMAP;
+		uart->port.mapbase = regs->start;
+		uart->port.mapsize = resource_size(regs);
+		uart->port.flags = UPF_IOREMAP;
 		break;
 	default:
 		return -EINVAL;
 	}
 
 	/* default clock frequency */
-	uart.port.uartclk = 1843200;
-	uart.port.type = PORT_16550A;
-	uart.port.dev = &pdev->dev;
-	uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+	uart->port.uartclk = 1843200;
+	uart->port.type = PORT_16550A;
+	uart->port.dev = &pdev->dev;
+	uart->port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
 
-	ret = uart_read_and_validate_port_properties(&uart.port);
+	ret = uart_read_and_validate_port_properties(&uart->port);
 	/* no interrupt -> fall back to polling */
 	if (ret == -ENXIO)
 		ret = 0;
 	if (ret)
 		return ret;
 
-	line = serial8250_register_8250_port(&uart);
+	line = serial8250_register_8250_port(uart);
 	if (line < 0)
 		return line;