From: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Tue, 7 Jan 2025 14:11:16 +0000 (+0100)
Subject: arm64: dts: mba93xxca: Do not assert power-down pins
X-Git-Tag: next-20250219~135^2^2~10
X-Git-Url: https://gentwo.org/gitweb/?a=commitdiff_plain;h=fbd9877b848ecbf42dd8969e358a7226d4239487;p=linux%2F.git

arm64: dts: mba93xxca: Do not assert power-down pins

Change the output to inactive (output-low) for active-low pins, resulting
in high-voltage of power-down pins. Thus this enables the attached
devices.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 861a028a1b16..b8ccc946c62d 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -448,38 +448,38 @@ expander1: gpio@71 {
 				  "WLAN_PERST#", "12V_EN";
 
 		/*
-		 * Controls the WiFi card PD pin which is low active
-		 * as power down signal. The output-high states, the signal
-		 * is active, e.g. card is powered down
+		 * Controls the WiFi card's low-active power down pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
 		 */
 		wlan-pd-hog {
 			gpio-hog;
 			gpios = <4 GPIO_ACTIVE_LOW>;
-			output-high;
+			output-low;
 			line-name = "WLAN_PD#";
 		};
 
 		/*
-		 * Controls the WiFi card disable pin which is low active
-		 * as disable signal. The output-high states, the signal
-		 * is active, e.g. card is disabled
+		 * Controls the WiFi card's low-active disable pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
 		 */
 		wlan-wdisable-hog {
 			gpio-hog;
 			gpios = <5 GPIO_ACTIVE_LOW>;
-			output-high;
+			output-low;
 			line-name = "WLAN_W_DISABLE#";
 		};
 
 		/*
-		 * Controls the WiFi card reset pin which is low active
-		 * as reset signal. The output-high states, the signal
-		 * is active, e.g. card in reset
+		 * Controls the WiFi card's reset pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
 		 */
 		wlan-perst-hog {
 			gpio-hog;
 			gpios = <6 GPIO_ACTIVE_LOW>;
-			output-high;
+			output-low;
 			line-name = "WLAN_PERST#";
 		};
 	};