From 094f33935009832fc4e40cc7396049703f2dd05b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 14 Nov 2025 16:54:13 +0100 Subject: [PATCH] dt-bindings: gnss: u-blox: use open-drain reset and safeboot in example The RESET_N and SAFEBOOT_N pins should typically be left open and only be connected to ground in rare cases where a device is misbehaving. Specify GPIO_OPEN_DRAIN in the example as this is what should generally be used. Acked-by: Conor Dooley Signed-off-by: Johan Hovold --- Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml index 9f14cfe7efd1..d016808f65cb 100644 --- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml +++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml @@ -67,7 +67,7 @@ examples: compatible = "u-blox,neo-8"; v-bckp-supply = <&gnss_v_bckp_reg>; vcc-supply = <&gnss_vcc_reg>; - reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - safeboot-gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + safeboot-gpios = <&gpio 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; }; }; -- 2.47.3