From be06e25e3cf6056efb53a8c8cfd1aa1a1cc8fdc7 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Thu, 20 Feb 2025 12:09:46 +0100 Subject: [PATCH] arm64: dts: mediatek: mt8390-genio-common: Add Display on DSI0 Configure the DSI0 display pipeline and add regulator, pinctrl and display node to enable the Startek KD070FHFID078 panel found on the MediaTek Genio 510 and Genio 700 EVKs. Link: https://lore.kernel.org/r/20250220110948.45596-3-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- .../dts/mediatek/mt8390-genio-common.dtsi | 145 +++++++++++++++++- 1 file changed, 137 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi index 2f6c21f86893..ceade69742a9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi @@ -21,6 +21,7 @@ / { aliases { + dsi0 = &disp_dsi0; ethernet0 = ð i2c0 = &i2c0; i2c1 = &i2c1; @@ -34,6 +35,15 @@ serial0 = &uart0; }; + backlight_lcm1: backlight-lcm1 { + compatible = "pwm-backlight"; + brightness-levels = <0 1023>; + default-brightness-level = <576>; + num-interpolated-steps = <1023>; + power-supply = <®_vsys>; + pwms = <&disp_pwm1 0 500000>; + }; + chosen { stdout-path = "serial0:921600n8"; }; @@ -218,6 +228,28 @@ regulator-max-microvolt = <5000000>; enable-active-high; }; + + lcm1_iovcc: regulator-vio18-lcm1 { + compatible = "regulator-fixed"; + regulator-name = "vio18_lcm1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pio 111 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dsi0_vreg_en_pins>; + vin-supply = <®_vsys>; + }; + + lcm1_vddp: regulator-vsys-lcm1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_lcm1"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vsys>; + }; }; &adsp { @@ -230,6 +262,67 @@ status = "okay"; }; +&disp_dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "startek,kd070fhfid078", "himax,hx8279"; + reg = <0>; + backlight = <&backlight_lcm1>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 25 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&lcm1_iovcc>; + vdd-supply = <&lcm1_vddp>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_pins>; + + port { + dsi_panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dither0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&dsi_panel_in>; + }; + }; + }; +}; + +&disp_pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm1_pins>; + status = "okay"; +}; + +&dither0_in { + remote-endpoint = <&postmask0_out>; +}; + +&dither0_out { + remote-endpoint = <&dsi0_in>; +}; + +&gamma0_out { + remote-endpoint = <&postmask0_in>; +}; + &gpu { mali-supply = <&mt6359_vproc2_buck_reg>; status = "okay"; @@ -381,6 +474,10 @@ domain-supply = <&mt6359_vsram_others_ldo_reg>; }; +&mipi_tx_config0 { + status = "okay"; +}; + &mmc0 { status = "okay"; pinctrl-names = "default", "state_uhs"; @@ -490,6 +587,10 @@ mediatek,mic-type-1 = <3>; /* DCC */ }; +&ovl0_in { + remote-endpoint = <&vdosys0_ep_main>; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins_default>; @@ -528,6 +629,12 @@ }; }; + disp_pwm1_pins: disp-pwm1-pins { + pins-pwm { + pinmux = ; + }; + }; + dptx_pins: dptx-pins { pins-cmd-dat { pinmux = ; @@ -848,20 +955,22 @@ }; }; - panel_default_pins: panel-default-pins { - pins-dcdc { - pinmux = ; - output-low; - }; - - pins-en { + dsi0_vreg_en_pins: dsi0-vreg-en-pins { + pins-pwr-en { pinmux = ; output-low; }; + }; + panel_default_pins: panel-default-pins { pins-rst { pinmux = ; - output-high; + output-low; + }; + + pins-en { + pinmux = ; + output-low; }; }; @@ -1039,6 +1148,14 @@ }; }; +&postmask0_in { + remote-endpoint = <&gamma0_out>; +}; + +&postmask0_out { + remote-endpoint = <&dither0_in>; +}; + &scp { memory-region = <&scp_mem>; status = "okay"; @@ -1091,6 +1208,18 @@ status = "okay"; }; +&vdosys0 { + port { + #address-cells = <1>; + #size-cells = <0>; + + vdosys0_ep_main: endpoint@0 { + reg = <0>; + remote-endpoint = <&ovl0_in>; + }; + }; +}; + &u3phy0 { status = "okay"; }; -- 2.47.3